How to cut a mirror with a Dremel

How to Cut a Mirror with a Dremel-Tools Coach

Do you know how to cut a mirror with a Dremel? I know you will like to do this task by own at home. The cost of any particular worker to do it is very high. So, do not worry; you have reached the right spot. Nowadays, most people need to cut the mirror or glass for the use of different purposes. Sometimes, they want to give new shapes to the windows or like to change the design as well. So, the method to cut the mirror would not allow a great deal for him. You have to follow all the steps for an accurate result.

You do not need to get more headaches for the additional cost of cutting appliances for every new shape of the mirror. How to cut a mirror without a glass cutter? A single instrument which is the Dremel can do the entire task. But the main question is, how will you use the tool for all kinds of purpose. It is a little bit flexible and rotatory while using it. However, follow all the steps which will give in the following for reliable output.

There are multiple bits in the Dremel; you must know the requirement of work. Most of the glasses needed a single exact bit, whereas some others also demanded multiple ones. Moreover, all these things must clear at the time of Dremel’s purchase to the shopkeeper. Furthermore, paste tape versus the glass and outline with the help of a pencil or cutter. The experts also said that the glass must through the water for easy cutting.

I know you have picked all the necessary detail before cutting the mirror. Now the time is to explain all the steps very briefly for you.  All the information have manipulated without any interrupting the steps by it.

Basic Precautions

After searching a lot of work regarding the cutting of the mirror, I gathered some useful descriptions for the viewers. One thing to take into the dermal is the high-power instrument and do not take it easy.

When you have started to cut the mirror, the bit attached to the Dremel will move very fast suddenly. The average spinning speed of this tool started from 10,000 to the 3500 RMPs. However, it is up to the user which speed is required for the useful result? While you are cutting the glass, you must be aware of all the following precautions.

  • Your eyes must cover with a heavy tool. You know that any small particle of glass may harm the eyes.
  • I suggest to you that do not forget to wear the mask to get rid of dust.
  • Always, spins the cutting tools towards the required are.
  • Your gloves must be of high quality.
  • Outline the glass for getting some easiness.
  • Place the glass very tightly to reduce the chance of movement during the cutting time.

Usual Dremel Mirror (Glass) Cutting Bits

 How to cut a mirror at home? Suppose that you are going to cut the mirror from a straight line, then the usage of the 545 Diamond Wheel must good for this. The outer thickness for this tool is only 0.6mm, whereas the diameter rises to 22.2 mm. It has consisted of the dust of diamond and coated fully by the makers. However, it is the only suitable option for you to use.

For making a hole in the surfaces of glass, do not forget to pick the 663DR ¼” Glass Drilling Bit to attain the useful result. It also has different qualities in the Bazar by knowing the requirements.

How to Cut Glass with A Dremel

How to cut acrylic sheet with Dremel? The method depends upon the nature of the work. There are slight differences to cut various types of mirrors or glasses. For example, you have to use the style of wheel (Dremel bit), it is obvious to use the cutting PVC pipes.

Depending on the cut that you are looking for, the method for cutting glass with a Dremel will vary slightly. Having very high RPMs, the spins of wheels must come along the line to cut. You must hold the tool very firmly and move very slowly.

Now I am going to give the detail of all the usual steps of cutting the mirror.

Step 1

You must paste the tape with the line, where you have needed to cut the glass piece. Cutting a mirror with an angle grinder is also the same. On the other side, for cutting the bottle into two pieces like reshaping the glass, do not forget to use the tape for this purpose also.

The tape provided multiple facilities like the borderline and safety for you. The experts also prefer masking tape.

Step 2

The 2nd step is related to draw the line. If you have a permanent marker, then it will good. The permanent market did erase due to the presence of water.

Make a line on the tape and start the next procedure. We can say it an additional safety precaution also.

Step 3

Put the glass below the little stream of continuing water. After that start to cut the mirror very slowly, the water will hold the temperature at a constant level. Moreover, you will feel more easiness when running the tools to cut the glass.

One thing you must know that the process is quite different for using the Dremel of corded. It demanded some angle to release the water to go into the cutting surfaces.

Step 4

When the cutting process has done thoroughly, the next task is to make the surfaces very smooth. To do it, use the diamond file of 80 grit (sandpaper bit). Do not forget to wear gloves because the surface can cut your finger. Please, take some strips while there is blood in your hand due to any mistake.

I want to suggest you do the procedure very smoothly to avoid any damage. If you try to use hard hands while making the surface very clear, then it would be harmful to you. All the children must stay away from the complete work and tools also.

Final Words

I tried my best to provide all the useful information for the viewers. Now, the problem of how to cut a mirror with a Dremel has solved very wisely. Please, pick all the steps to pick the better output than the usual. I know you will save much cost by doing it. Nowadays, the cost of everything raised due to much inflation in the market. Purchase the tape, face mask, and essential precaution bag with you. All the procedures must revise very slowly and steadily.

If you still have any question in your mind, then you can go for more knowledge by browsing the internet. One of the best ways to gain experience is to watch the complete work with the eyes.

You May Also Like: How to test alternator with screwdriver

Leave a Comment

Your email address will not be published. Required fields are marked *

1 Scroll to Top